Protective back case for 6502 40th Anniversary Computer Badge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective back case for 6502 40th Anniversary Computer Badge For Lee Hart's 6502 40th Anniversary Computer Badge…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Protective back case for 6502 40th Anniversary Computer Badge
For Lee Hart's 6502 40th Anniversary Computer Badge
Revision History
rev 2 - scruss 2017-12-03
- removed dependencies on external DXF outlines
- cleaned up parameters
- extended base so the case can act as a stand (great suggestion from
Josh Bensadon)
- extensively commented
Copyright
Protective back case for 6502 40th Anniversary Computer Badge
© 2017, Stewart C. Russell - scruss.com
Licence
Licensed to you under Creative Commons Attribution-NonCommercial-ShareAlike 2.5 Canada (CC BY-NC-SA 2.5 CA) licence: https://creativecommons.org/licenses/by-nc-sa/2.5/ca/
Pictures
http://scruss.com/blog/2017/12/02/3d-printed-back-cover-for-6502-badge/
Print Settings
Printer:
Reach 3D
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Notes:
- Layer height: 0.2 mm
* Shell: 0.8 mm (2 shells, 0.4 mm nozzle)
* Base/Top: 0.6 mm (4 solid layers)
* Fill: 100%
* Printer: Reach 3D
* Print Speed: 60 mm / s
15 mm / s (bottom layer)
- Retraction: 4 mm @ 40 mm / s
- Adhesion type: Brim
- Material: PLA+ (non-rigid PLA)
- Temperatures: 215 °C / 50 °C (nozzle / bed)
- Supports: None
Post-Printing
Cut out thin support layer from lanyard hole with a sharp knife
Category: Computer