DnD Seven Dice Container with threaded lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I didn't have magnets so I added a threaded lid. I also make the D6 recess wider (17mm square) and raised the D20 slot.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 188
- Wydruki
- 1
- Wyświetlenia
- 1016
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- BSD License
This is based on the design posted by SudoCool here:
https://www.printables.com/model/116655-dnd-dice-travel-box
I don't have magnets so I decided to make it the dice holder round and close with a screw on lid. Also, my 16mm D6 die was too big for the square recess in SudoCool's design so I opened it up the hole to 17mm. Additionally, I raised up where the D20 sits in the center by 3mm.
I put on threads for the body and lid from another project stl I had and scaled it up. This wasn't the best way to do it and the thread portion doesn't very print very pretty but does function smoothly once the lid and base are worked in together a few minutes (move very little at a time to avoid jamming) .
While the print is functional once the threads are worked in, there is room for improvement in the print aesthetics. The threads could be better. I am attaching a .STEP file I of the round body without the threads if someone decided they want to improve it, otherwise use the body and lid as-is but be aware that it prints a little rough near the threads.
If people like the idea, I may go back myself and redesign the threads better myself.
Enjoy!