1 / 10
45 degree filament cutter (Standard box cutter blade)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cuts filament it at a 45° angle. All you need is a razor blade. (Update)
- Ocena
- 4,778 / 5
- Polubienia
- 35
- Pobrania
- 246
- Wydruki
- 7
- Wyświetlenia
- 1184
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 7) (Komentarze: 14)Remiksy (0)Kolekcje (52)Powiązane
All 3-D printed all you need is a razor blade. print at 0.2mm. I've only tried with PLA not sure about PETG. print the main body standing up with a brim. You can try making the pin solid if it breaks make it 2 or 3 perimeters so I can flex.