DPS3005 (DPS5005) Power Supply Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DPS3005 (DPS5005) power supply case with support for USB-C & DC barrel jack
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 224
- Wydruki
- 1
- Wyświetlenia
- 1938
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the original design by @nrp and the remix by @Nitek (thingiverse) but I also wanted some of the features seen on other versions of the power supply case such as:
- DC barrel jack input
- Tilt the front panel up to make the display easier to read on a workbench
- Power leads located in the front and under the display to keep the wires out of the way
- Power switch
Now you can alternate between USB-C PD with a decoy module (which I don't have yet) OR use the DC input jack. Obviously do not connect both at the same time!
I closed the hole for the switch before uploading because there's an infinite number of switch sizes out there and it is a totally optional component. If you want a switch in the same spot it is easy to cut a hole post-print.
No supports needed. Sorry, I don't have a STEP file for this as I remixed it by hacking STLs.