Ice Bath Holder for Ninja Creami Container in Kitchenaid Bowl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 pieces that slot together to hold a Ninja Creami container steady in an ice bath in a Kitchenaid bowl.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 1480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my solution to an incredibly niche problem I was having, which was how to keep my Ninja Creami container from bobbing all around and tipping over while chilling in an ice bath in my Kitchenaid stand mixer bowl. For ease of printing and easier storage, the holder is comprised of 4 of the same piece that slot together and fit snugly over the Kitchenaid bowl rim.
Fill the bowl with ice and a dash of salt, pop the holder over top, slip the Ninja Creami container into the center of the holder, and add cold water to the Kitchenaid bowl until the height of the water matches the height of the ice cream base. You can even leave a whisk in the Ninja Creami container to stir every once in a while to cool the ice cream more quickly and evenly.
Print details:
- Printer: Ender 3 v2
- Material: Amolen Marble PLA
- Layer height: 0.42mm
- Line width: 0.72mm
- Infill: 20%
- Supports: Yes, touching buildplate, 70 degree overhang