Prusa MK3/S Y-Rod Mounts (no cable ties)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was looking for an upgrade of the original Y-Rod holders that are shipped with the MK3/S and came across the one
- Ocena
- 4,917 / 5
- Polubienia
- 48
- Pobrania
- 623
- Wydruki
- 6
- Wyświetlenia
- 5679
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for an upgrade of the original Y-Rod holders that are shipped with the MK3/S and came across the one from MarcoZ76 which was going in the same direction I had in mind. However his Version uses a screw and I wanted it to be compeltely screw or cable tie less and held by friction (basicalle the original one is also held by friction and the rods can go nowhere).
So I redesigned this holder but changed a few things from the original design of Marco.
1) I designed my version without the grub screw
2)I wanted to use the original M3nS nuts and therefore added a pocket
3) The original version has a little nose that fits into the aluminum profile so I added that one too.
It tool me a few versions but this one fits perfect.
Print instructions
I printed it in Prusament PETG with 100% infill and no support