Furniture Leg Cap 40mm Square 10mm Lift
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
2,06 € – 2,52 € netto (bez VAT)
Dla pliku: Furniture Leg Cap 40mm Square 10mm Lift_0.2mm_PLA_MK3_2h34m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 2,29 € netto (środek widełek).
- Masa podana przez autora
- 23 g
- Czas druku podany przez autora
- 2,56 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
End cap for square furniture leg that is 40mm with a 10mm lift.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Designed to keep sharp edges of furniture from scraping the floor. It has a 4mm deep pocket with 1mm clearance around for the leg to sit in. This should scale to fit most other size applications.
I use three perimeter walls and 80% infill to help reduce creep because I used PLA. After several months I have not noticed any changes, but if I printed it again, I would use another material, probably PETG or ASA.