Duplo Hubelino Marble run sphere 24mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
24mm sphere for use with Lego Duplo marble runs. Requires some assembly and a drop of glue. Superglue works well.
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 221
- Wydruki
- 4
- Wyświetlenia
- 1057
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print two hulls with the flat side down.
Print one core with the side face down. On this image I marked the down face in blue. This way, the layerlines of the plug are 90 degrees to the layerlines of the hulls, providing maximum strength.
For assembly, just put the core in the center of a hull and push on another hull. The fit is pretty close, and pretty hard to pull apart once assembled. With a drop of super glue on each side of the core, it'll be rock solid.
If you intend to glue, do NOT dryfit both hulls on a core, because you might not be able to pull it apart, and it'll fall apart randomly later.
The easiest way is to take one hull, put in a drop of glue, and then put in the core firmly. Let dry for a second, and put a drop in the other hull. Push the plug/core assembly into that.