Sapphire Plus/Pro Mosquito Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE: Updated the FanMount.stl to include fins in the air path. This vastly improves heatbreak cooling and even…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 794
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
UPDATE:
Updated the FanMount.stl to include fins in the air path. This vastly improves heatbreak cooling and even drops the noise level due to reduced turbulence in the air path.
Designed a Mount for the Slice engineering Mosquito/Mellow NF-Crazy hotend.
It includes a 4020 fan for the hotend cooling and a 5015 fan for the parts cooling fan. The whole thing is a drop-in replacement for the stock hotend.
It also supports a BLTouch.
BLTouch offsets: X-28 Y0
- Print in PETG or ABS. Flame retardant material recommended.
- Make sure you buy a 5015 radial fan with at least 0.1A for sufficient part cooling.
- I used a Sunon 4020 24V 0.84W fan for hotend cooling but it makes the printer much louder. I will connect it to a stepdown converter to lower the RPM.
The cooling shroud is based on Stefan's CNC kitchen V6 mount (https://www.thingiverse.com/thing:3972199).
Hardware required:
- 1x 4020 24V fan
- 1x 5015 24V fan
- 1x Stock thermistor and heating cartridge
- 1x Grove mount adapter for the Mosquito
Screws:
- 3x stock M4 mounting screws or 3x M4x6mm
- 4x M4x30mm
- 2x M4x20mm
- 2x M3x8mm
- 2x M2.5x8-10mm
- Mounting hardware for the BLTouch that comes with it.
Things in the works:
- 4020 fan guard
- 4010 fan support and guard
Print Settings
Printer:
Sapphire PLUS
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
75%+
Filament:
Any PETG
Category: 3D Printer Parts