Thicker Minifig Hexagons (+ some with background image)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have all my printers fitted with 0.6mm nozzles and the original models had a bit too thin walls for that to work well
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I have all my printers fitted with 0.6mm nozzles and the original models had a bit too thin walls for that to work well.
I therefore made the walls 2mm thicker + moved the hole for the minifig base 1mm up.
This model is based off the OpenSCAD file from 1 December 2021 in the original Thingiverse project and thus differs a bit from the one by Casadebricks.com here.
This model uses all of the default settings from the original project, including the “loose” fit. But I have also included a plain model with a tight fit, not yet tested that one though.
I also decided to generate some fun backsides and will probably generate more and upload.