Ender 3 (Pro) webcam mount Logitech C300/C500/C600
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Ender 3 Webcam mount for Logitech C300/C500/C600 or other similar. I use C500. I made the height…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 547
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a remix of Ender 3 Webcam mount for Logitech C300/C500/C600 or other similar. I use C500.
I made the height lower to be at about the height of the bed and a bit longer. Also as a joint I use only M5 screw, seems enough.
The camera interface is simple 4.5mm hole for any M4 screw in small 2cm diameter platform.
I drilled the same hole in the integrated camera holder (see the pictures) which has extra joints, giving me extra positioning freedom in about 10 cm radius.
As extra, I put there two 3mm holes on the side for my light holder. You can find it here
Other material:
M5x35~45 screw + nut
M4x12~20 screw + nut
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Category: 3D Printer Accessories