Federal Corvette 2 Part (Elite Dangerous)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Federal Corvette model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to…
- Ocena
- 5 / 5
- Polubienia
- 97
- Pobrania
- 1163
- Wydruki
- 12
- Wyświetlenia
- 4130
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
Federal Corvette model from Elite: Dangerous
Model is split into two parts at the widest point and down the centre to permit better printing
Point the two halves vertically at the seam
This work is strictly fanart and not meant for commercial distribution. All respected trade marks are property of Frontier Developments
To make it the same scale as my Anaconda (1000:1) = 167.8mm long
Per request I added the non-split version as well
//2019-03-16 - Added a version of the Rear with the spoiler, should be fat enough to print
Print instructions
Unassociated tags: Federal Corvette
Category: Vehicles