Batman Logo Wall Plaque
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Batman Logo Wall Plaque
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 259
- Wydruki
- 3
- Wyświetlenia
- 934
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple but effective wall plaque I made for my little nephew.
I wanted it to have a 'premium' feel so it is quite thick with high infill to give it some weight and make it feel sturdy. I used glow in the dark pla for the main oval and you get a much better glow if there's more material. You could easily trim this down to a few mm thick and it would still look great.
The rim push fits onto the main oval, I used 2 part epoxy glue to stick the bat logo to the plate. Just a few 3m pads to stick it to the wall.
Printed at 0.12mm height at 60mm/s. Black PLA+ and Glow In The Dark blue.
220mm wide. Printed on an Ender 3 Pro, place diagonally across the build plate.