One Liter Bottle Hydroponic Pot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small desktop hydroponic pot. It accepts a 1 liter bottle commonly used for sparkling water as a nutrient…
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 887
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is a small desktop hydroponic pot. It accepts a 1 liter bottle commonly used for sparkling water as a nutrient reservoir.
The pot uses standard 2.5" net cups for the plant
If you're using PLA, you should coat the inside of the pot with a waterproof coating. I used 5 coats of rustoleum leakseal: https://www.homedepot.com/p/Rust-Oleum-Stops-Rust-11-oz-LeakSeal-Clear-Flexible-Rubber-Coating-Spray-Paint-265495/203165633
but any flexible sealant should work.
I've included the 123Design file, .STL, and .print files
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator (5th Generation)
Rafts:
Yes
Supports:
No
Resolution:
.2
Infill:
10%
Filament: makerbot PLA Grey/Blue
Category: Outdoor & Garden