BBC Microbit Controller Case with Detachable Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A controller shaped case for the BBC Microbit with a detachable battery holder that slides on with a dovetail mount.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 962
- Wydruki
- 1
- Wyświetlenia
- 2485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a controller shaped case for the BBC Microbit with a detachable battery holder that fits the standard 2xAAA (JST-PH) battery pack for the Microbit. The original design for the controller case was done by Guillermo Melantoni (@melton3d). I modified it to fit the Microbit more easily and added a detachable battery pack holder the attaches with a dovetail mount.
I printed the controller case with 20% infill with supports and oriented flat with the dovetail on the bottom. I printed the battery enclosure vertically on its side with 20% infill and supports and with the cutout for the power switch facing up.