Shower Caddy J Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is for the Humorous.P Plastic Shower Caddy from Amazon: https://www.amazon.com/dp/B083S4P829 The product is…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
This is for the Humorous.P Plastic Shower Caddy from Amazon:
https://www.amazon.com/dp/B083S4P829
The product is available online and at some department stores in the US. The bottom hooks are a joke on this caddy, so I designed a "J" hook that works perfectly to resolve this design flaw. The hook snaps into the recessed areas so it shouldn't come out when removing your favorite shower accessory.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
10%, Lightning fill (Cura)
Filament: Longer PLA White
Notes:
I suggest 3 walls if you are using the Lightning infill. If you are not using Cura for your slicer, you probably don't have the Lightning infill option, but maybe something similar. Use the most minimalist infill option, then. You could also trying printing with no infill and add another wall.
I suggest a brim of 5 mm with a 0.18 distance if your printer bed tends to have adhesion issues when printing thin or small models.I've included a Cura Preview for a suggested orientation to print four (4) hooks printed at once.
Category: Bathroom