Macchina M2 w/ XBee Card Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on JRad's simple enclosure for the Macchina M2, this remix increases the height of the face, buttons and top to…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Based on JRad's simple enclosure for the Macchina M2, this remix increases the height of the face, buttons and top to account for a 2mm or 4mm XBee daughter card being installed.
Also included is a new inset button so the button should be 0.5mm below the case for buttons you really don't want to press like the erase button.
Uses no screws and has no latching tabs, but it's a pretty snug fit. I use mine without gluing it together.
Designed to print without supports.
JRad's Assembly video: https://youtu.be/L80Ubc6hCX0
More info on the Macchina here: https://www.macchina.cc/
Category: Automotive