Deathstar Extruder Spinner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When I assembled my 101Hero printer, one of the first modifications I made was to convert to a Bowden extruder. When I…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
When I assembled my 101Hero printer, one of the first modifications I made was to convert to a Bowden extruder. When I saw a Batman spinner that sits on top of the NEMA17 axle, I knew I would want to create some iconic derivatives. What better option in early May than a Death Star spinner. I have included a half-size version of the Star Wars Display Stand by muckychris so when not in use, you can still gaze at the might of the Galactic Empire
This is a derived work from hendo420 and muckychris. Thank you both for your work.
- deathstar_assembled1.stl was created for the preview picture. The stand ended up embedding in the deathstar so it will not work as a spinner (unless you have a long enough shaft that the entire stand clears the extruder).
- deathstar_assembled2.stl should be printable with only build plate supports but I don't know if either of the assembled models will be able to unscrew. The spinner itself is offset from the stand so it should break free of any supports.
Print Settings
Printer:
101Hero
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.1mm for details
Infill:
10% or higher (or 0% w/ 5+ solid wall layers)
Category: 3D Printer Accessories