1 / 1
Farragut Battle Cruiser 3 Part (Elite Dangerous)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Federal Corvette model from Elite: Dangerous Model is split into three parts at the widest points Point the three…
- Ocena
- 5 / 5
- Polubienia
- 79
- Pobrania
- 755
- Wydruki
- 0
- Wyświetlenia
- 3262
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (9)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (138)Powiązane
Federal Corvette model from Elite: Dangerous
Model is split into three parts at the widest points
Point the three parts vertically at the seam
This work is strictly fanart and not meant for commercial distribution. All respected trade marks are property of Frontier Developments
To make it the same scale as my Anaconda (1000:1) = 2040mm long
I suggest scaling it down 10x to 10000:1 at 204mm long
Please someone print it at the full 1000:1!
Print instructions
Category: Vehicles