1 / 5
Hive Thermostat Frame — zdjęcie 1
1 / 5

Hive Thermostat Frame

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replacement frame for Hive Thermostats.

Ocena
5 / 5
Polubienia
11
Pobrania
61
Wydruki
1
Wyświetlenia
593
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial

I wanted to print my own custom frames for my Hive thermostat but there doesn't appear to be any models online so I decided to create my own in Fusion 360.

Before printing, ensure your Hive thermostat supports replaceable frames. Apparently, the latest version of the thermostat (which has been sold since August 2021) no longer supports replaceable frames.

I printed the frame and buttons with a 0.2mm layer height and with tree supports (in Cura 5.1 beta). When printing the buttons, print them upright in the supplied orientation. This means the layer lines will be along the length of buttons, allowing them to flex without the risk of them snapping. The buttons have tabs on either end which fit into slots in the frame.

For a solid frame, I increased the wall count rather than the infill percentage and sliced on a slicer that uses the Arachne engine. (Cura 5.0+ / PrusaSlicer 2.5.0+)

Tagi