Archery Arrow Rest
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An arrow rest that aims to avoid contact with the fletching of an arrow.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 306
- Wydruki
- 1
- Wyświetlenia
- 3141
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
A simple arrow rest I designed for my little brother's bow after the one he had on his bow broke. Designed so that the fletching can go through with minimal contact. The one I printed was designed for 7mm arrows, 10 mm away from the inside of the bow. I have attached two other versions for 5mm and 9mm arrows, as well as the Fusion source file where you adjust parameters to suit your needs.
Print Settings (7mm version):
Print with the side facing the string down (bumpy looking side in the pictures).
Material: Duramic TPU 95A
Layer Height: 0.2mm
Default Extrusion Width: 0.45mm
Perimeters: 2
%Infill: 50