Meshlicious Rear Fan Bracket Mount 60mm & 50mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount two 60mm or 50mm fans on the rear of the Meshlicious
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 629
- Wydruki
- 1
- Wyświetlenia
- 3853
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
While there are a few designs out there to mount two fans on the back of the SSUPD Meshlicious, I wasn't really impressed with any of them, some have misaligned holes, and none of them accommodated two 50mm fans which I happened to have spares of.
I designed these brackets from scratch, but they were inspired by arwame's design here.
Use standard fan screws to mount the fans (make sure they're pushing air out of the case), and use the 3 included screws holding the PCIe brackets to mount the part to the case. I was able to screw from outside the case, by holding the bracket tight to the inside while I screwed in.