Prusa i3 MK2 Nest/DropCam Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed with gray Solutech PLA. Frame clip snaps onto the top of the frame in between the spool holders.
- Ocena
- 4 / 5
- Polubienia
- 6
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 397
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Printed with gray Solutech PLA.
Frame clip snaps onto the top of the frame in between the spool holders.
Note that the camera will interfere with the printhead umbilical line at very high build heights (basically when the x stage hits the limits), but is fine for every print I've done.
I used some of the spare screws from the Prusa i3 Mk2 kit bag.
Print instructions
Category: 3D Printer Accessories Print Settings
Rafts: Doesn't Matter
Supports: Yes
Resolution: 150um
Infill: 20%
How I Designed This
Remixed from the Ultimaker Nest Cam holder, but with a custom-designed clip for the Prusa i3 Mk2. I used FreeCAD to convert the STLs to solids, then modified the clip in PTC Creo.