RaspberryPi 3B Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Raspberry Pi 3B case with an additional version for OctoPi Octoprint servers. There are locating holes…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of Suraki's RasPi case (https://www.thingiverse.com/thing:710688), with an additional version for OctoPi Octoprint servers.
There are locating holes on the logo pieces that match locating pins added to the case tops.
If you're using an easy to glue filament type, add a drop of glue to each pin to secure the logos. My preferred method is to melt the pins to hold the logo in place. I use a common nail stuck in a short piece of bamboo heated over a candle. You can also use a soldering iron or a 3d printing pen.
I also added a stand to hold the Pi vertically.
Print Settings
Printer:
Prusa Mini
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
Duramic 3D PLA
Grey, Red & Green
Category: Computer