Retractable Armrest Support (Hinge) for Ergohuman Pro Ottoman

Enable to fold armrests of Ergohuman Pro Ottoman when you do not use them.

Good for instruments playings or using chair with slightly low height desk.

[Printing Settings]

Material: ABS/PC/PC-CF/PA6 

(PLA should be avoided. Exposure to direct sunlight/high room temperature might soften them.)

Layer Heisht: 0.1MM

Infill: 100%

Outer Walls: 4

USE SUPPORT: YES

PRINT DIRECTION: pleaes refer to the attached picutre

[BOM]

   Printable Parts

• LOWER_SUPPORT x 2 (You have to mirror one in Slicer.)
• UPPER_SUPPORT x 2 (You have to mirror one in Slicer.)

   Hardwares

• M8 Nut x 2
• M8 x 40MM Hexagon Head Bolt x 2
• M8 x 40MM Hexagon Socket Head Cap Screw x 2
• M8 Thumb Nut x 2 

[Caution]

• Please make sure that Supportshave enough strenghth before use.
• DO NOT STRIKE SUPPORTS when recline armrests.
• DO NOT  PUT YOUR WEIGHT onto armrests.