1 / 6
Space Princess - Utility Belt (Redux) — zdjęcie 1
1 / 6

Space Princess - Utility Belt (Redux)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Uploading my "back catalog" to Prusa Printers!

Ocena
0 / 5
Polubienia
16
Pobrania
45
Wydruki
0
Wyświetlenia
925
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Uploading my "back catalog" to Prusa Printers! Hope you enjoy this design from 2018:

Yes, I have dabbled in a belt accessory before, but field tests with a toddler showed that it was more of an aesthetic rather than functional piece of hardware. A redesign was necessary in order to facilitate the important missions a Space Princess meets on any given day.

See it in action: https://youtu.be/vghqghM_Y1E

This one holds the Solar Sword & Bolide Blaster

https://www.prusaprinters.org/prints/24790-space-princess-solar-sword

https://www.prusaprinters.org/prints/24793-space-princess-bolide-blaster

Full parts list and DIY instructions at https://dragonmountaindesign.com/2018/05/20/project-space-princess-utility-belt-redux

Print instructions

Material: NinjaFlex Semiflex (Flex 98A) for the UB-Clip, and UB-BeltLoop.  Everything else is PLA.

UB-Face
Infill: 40% or more
Supports: Depending on the orientation of your print, yes.
Brim: Yes.

Everything else
Infill: 20%
Supports: No
Brim: No

Tagi