Space Engineers S-10 Modular Prop (Warfare Pistol)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an updated version of my previous 1:1 S-10 pistol with added features. The rear sights have a space for a…
- Ocena
- 0 / 5
- Polubienia
- 63
- Pobrania
- 189
- Wydruki
- 1
- Wyświetlenia
- 1166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an updated version of my previous 1:1 S-10 pistol with added features. The rear sights have a space for a magnet to be glued in, so you can place the rear iron sights or the reflex sight. There is now a magazine that can be removed, as well as an extended magazine. There is a magazine release that needs a pen spring to operate. It should snap into place otherwise.
If you want a left-handed version, simply mirror the grip in your slicer. Nothing else needs to be mirrored.
The optic cavities are for a 5mm diameter magnet, though I was using 4mm magnets. I put some paper stuffing in the hole to raise the magnet to be flush with the surface, then glued it in place.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
Yes
Resolution:
20
Infill:
10
Filament: Any Any Any
Category: Props