Knife Sharpening Tool - Best of remixes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Knife Sharpener My make of the Knife Sharpener This is a collection of all remixes that fit my needs, in order to make…
- Ocena
- 0 / 5
- Polubienia
- 89
- Pobrania
- 232
- Wydruki
- 0
- Wyświetlenia
- 3338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Knife Sharpening Tool - Best of remixes
- Designed 2021-05-16
- thing:4860228
- printables:249523-knife-sharpening-tool-best-of-remixes
TOC
Description
My make of the Knife Sharpener
This is a collection of all remixes that fit my needs, in order to make the Knife Sharpener.
The only part I design myself is the end cap for the 10mm pipe.
Most of the parts are not from this design, but remixed ones, anyway they can be found in this remix.
BOM
| Part | Thing | Description |
|---|---|---|
Body.stl | thing:1274297 | From the original design |
guideBody1.stl | thing:1274297 | |
GuideBody2.stl | thing:1274297 | |
Sphere.stl | thing:1274297 | |
Guide.stl | thing:1274297 | |
Knob.stl | thing:1274297 | |
Guide_0deg.stl | thing:1274297 | |
Guide_10deg.stl | thing:1274297 | |
Guide_12p5deg.stl | thing:1274297 | |
Guide_15deg.stl | thing:1274297 | |
Guide_20deg.stl | thing:1274297 | |
Guide_25deg.stl | thing:1274297 | |
Guide_30deg.stl | thing:1274297 | |
KnifeSharpenerFoot-v1.1.stl | thing:4605375 | Remixed version, for better stability |
Springloaded_Handle_4_Stones_Part_1.stl | thing:3655088 | Like the idea to have all the stones plugged |
Springloaded_Handle_4_Stones_Part_2.stl | thing:3655088 | |
Springloaded_Handle_4_Stones_Part_3.stl | thing:3655088 | |
guid_stopper.stl | thing:4285716 | |
Guide_Holder.stl | thing:4419802 | Case for the angles |
HolderKnob.stl | thing:4591835 | The knob use 5mm screw, used HSS drill for the stone handle |
10mm-pipe-end-cap v1.stl |
Sharpening Tips
Found helpful to link the tips provided in the description of thing:4591835
- Get a set of stones for example 1000,3000 and 6000 grit. Start from lowest grit.
- Soak stones before sharpening.
- Sharpen one side of blade until you can feel a burr, then change side, then move to higher grit.
- Only apply pressure on the push stroke. don't apply pressure on the pull.
- Cover about an inch every stroke, work your way along the blade.
- Keep the blade edge parallel to the sharpener edge.
Buy me a coffee?
Enjoyed my work? Feel free to show your support by buying me a coffee. Your contribution helps fuel future projects and keeps the creativity flowing. Cheers!
- BMC - buymeacoffee.com/atanasyanew-
- PayPal - paypal.me/atanasyanew
- BTC - bc1q0c855fk9q033q3zqt5dy4hu6wvpn35sk82cjfa
- ETH - 0x10D0b4231A744c9487aCd908e2C8c9320784F64D
Print Settings
Printer Brand: Creality
Printer: Ender 3
Rafts: No
Supports: No
Resolution: 200
Infill: 20
Filament: rast3d.com PLA orange
Category: Hand Tools