Ridgeline squeeze hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
*Untested prototype!* For hanging small things on the ridgeline for your hammock, or similar.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 729
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a prototype and I have not tested it in the field yet. Beware!
For hanging small things on the ridgeline for your hammock, or similar. Squeeze the loops on the hook together, pull the line through them and release. The tension should keep the hook in place on the line.
I printed this on a Prusa MK3S+ with Addnorth EasyFlex (95A shore). I used the filament profile available on Addnorths homepage: https://addnorth.se/product/EasyFlex/EasyFlex%20-%201.75mm%20-%20500g%20-%20Clear
I used 20% infill and supports everywhere. I changed the support style to snug. The supports were surprisingly easy to remove. The filament had been out of the packaging for at least six months and was moist. That's why all the cobwebs in the photo.