MPSMv2 Rewire Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you are like me and keep assembling to fast then you forget to run the wires through the back hole that attaches to…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
If you are like me and keep assembling to fast then you forget to run the wires through the back hole that attaches to the panel and the connectors do not fit so I resized that back port to fit the connectors after soldering lol
Front Half: https://www.thingiverse.com/thing:2370329
Back Adapter (I used screws instead of the clips): https://www.thingiverse.com/thing:2817319
Print Settings
Printer:
Monoprice Select Mini V2 Q4 2017
Rafts:
Yes
Supports:
Yes
Resolution:
.4
Infill:
100
Notes:
I keep taking these panel off to tinker with the guts so due to all the screwing and unscrewing I made the infill 100% to withstand all my torquing.
I used rafts but its not needed, but I would suggest supports for the panel dome part.Category: 3D Printer Parts