NFC door lock control system for Videx 4000 series
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part was created as a NFC door lock control system for Videx 4000 series.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Open Community License v1
This part was created as a NFC door lock control system for Videx 4000 series. However part can be modifed to any other functionality, it fits the Videx 4000 frames.
Instead of click based mount I am using a kind of latches. The original click system was done from polycarbonate, I tried it but it is difficult to print and it breakes easily. This system with latches is much more durable and easier. Just place the main body part into the frame and close the latches from inside of the box. That is all. You can secure by screws if necessary.
Videx 4000 blank panel costs about 25$, this is much cheaper and you can accomodate any eletrocnics inside. Fusion360 file attached so you can modify.
Original NFC chip module costs about 550$ and it can be programmed for new chips only by opening the whole system. This system cost me 25$ (for parts) and it can be programmed or controlled over wifi remotely. In addition, I can open the doors also by smart phone or watches.
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Prusament PETG Galaxy Black
Category: DIY