HK Diversity Receiver Mount to Ground Station Power Supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bought Hobby King ground station power supply with HK Diversity Receiver Power supply comes with two mounting brackets…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Bought Hobby King ground station power supply with HK Diversity Receiver
Power supply comes with two mounting brackets for single receiver and none for diversity one.
So I made one.
Printed out of PETG
On Blue masking painters tape.
Print bed 80c
Print nozzle 260c
Room ambient temp to prevent warping around 80F
If that's too hot for you, than build an enclosure out of Dollar Tree foam boards around your print bed.
Nozzle Diameter 0.40
Extrusion Multiplier 1.00
Extrusion width =Auto
Retraction Speed = 1800.0
Coast at end Checked
Coasting distance 0.20
Retraction enabled
Retraction distance 5.00
Infill 70%
No supports required.
Print quality = Excellent. No stringing, very clean.
PS Added iPhone mount for HK ground station
Category: R/C Vehicles