1 / 3
Mirrored numbers (Gallery goodies for your Prusa Slicer by Startrekfan2 Remix)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mirrored numbers of Startrekfan2's Gallery goodies for your Prusa Slicer.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 673
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (31)Powiązane
I often use Startrkfan2's numbers to mark my design iterations. Since i usually mark my models on the bottom layer i always needed to mirror the glyphs and reduce the height to 0.4mm (that way it's at least two layer high at my most common layer heights). So i just exported the altered numbers with Startrkfan2's openSCAD file (very nice, take a look at it!) and re-imported them to use in the gallery.
It's hardly a remix but i thought it might be useful to some of you.
Let me know what you think of it!