1 / 2
Perchas eje Z  - Hangers z axis  Artillery Hornet — zdjęcie 1
1 / 2

Perchas eje Z - Hangers z axis Artillery Hornet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Perchas para calibrar el puente x en el eje Z de una artillery hornet

Ocena
5 / 5
Polubienia
15
Pobrania
177
Wydruki
1
Wyświetlenia
1542
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

This is Remake of https://www.thingiverse.com/thing:4158561 (Thanks Cesar from Cotrol 3D).
This are hangers to the bridge in Z, just put the hanges in the bridge and get with the one that has the hotend. when the  axis in in the hanges over the hanger.
Then release the excentic wheel, then adjust the wheel where the extruder is, then the other extreme.
Printer: Aritllery hornet
Layer height: 0.28
Printed in PLA.
walls counter: 5 (but can be more)
Temperature: nozzle: 205ºc, bed: 60ºC
supports: No, raft: No, Skirt: yes

 

Este es el Remake de https://www.thingiverse.com/thing:4158561 (Gracias Cesar de Cotrol 3D).
Estos son colgadores para el puente en Z, solo pon los colgadores en el puente y la parte inferior en la barra que sostiene el hotend. Luego suelta las tuercas exentricas que sujentan el eje donde esta el hotend.cuando el eje donde esta el hotend cuelga sobre la percha/gancho-
luego ajuste la rueda donde está el extrusor (Extremo mas pesado), luego el otro extremo para tener el eje Z nivelado.

(es buena idea tener un nivel para checkear la nivelación)


Impresora: Aritllery hornet
Altura de la capa: 0,28
Impreso en PLA.
Contador de paredes: 5 (pero pueden ser más)
Temperatura: boquilla: 205ºC, lecho: 60ºC
soportes: No, balsa: No, Falda: si

 

https://www.youtube.com/c/Control3D

Tagi