1 / 10
Camera holding accesories for 2020 v-slot profile — zdjęcie 1
1 / 10

Camera holding accesories for 2020 v-slot profile

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Turn a 2020 v-slot profile and a falcam f38 quick-release set into modular DSLR holder or impractical selfie-stick!

Ocena
0 / 5
Polubienia
49
Pobrania
160
Wydruki
0
Wyświetlenia
2233
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

Description:

2020 Aluminium extruded profiles are extremally useful for construction of 3d printers, laser cutters and other cnc machines, hence they can be found on the shelf of every maker.

This design open up a new opportunity to use 2020 v-slot profile in photography - as a sturdy mount for your DSLR camera. It uses excellent and cost effective ulanzi falcam f38 quick-release system to securely connect 3dprinted parts of the holders to expensive camera.

Initially designed to mount Canon EOS 80D with heavy lens (altogether 1.4 kg) between headrest bars of my car to record onboards from hobby track-day driving.

Parts list:

This design contains 3 separate accessories:

 

1. holder to attach a falcam f38 quick-realease base to a 2020 v-slot profile:

2 instances has to be printed and they require following hardware:

4x M4x10 bolt,

4x M3x5 bolt,

4x M3 nut

 

2. holder to attach a 2020 v-slot profile to 14 mm diameter headrest bar 

it consist of two models and requires following hardware:

4x M3x16 bolt,

2x M3x5 bolt,

6x M3 nuts

3. a tripod mount for 2020 v-slot profile

serves to mount profile to a tripod with standard ¼ UNC thread

it requires standard 3/8 to ¼ thread adapter.

Assembly instruction:

Simply press the nuts into the slots et voilà!

The number of required hardware can be reduced by half if needed.

 

Guidlines for printing:

All of the parts were printed with Prusa i3 Mk3s using PETG filament and 0.25 mm nozzle without supports. It can be successfully printed with 0.4 mm or 0.6 mm nozzle, however tolerances have to be adjusted.

The tolerances are rather precise and the parts have to be run-in to slide freely.

I'm attaching f3z files for customizability.

 

 

 

Tagi