Key Casting Clam
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE: Based on Deviant's advice I realigned the pegs therefore the picture of the printed part does not correctly…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 152
- Wydruki
- 1
- Wyświetlenia
- 809
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
UPDATE: Based on Deviant's advice I realigned the pegs therefore the picture of the printed part does not correctly represent the model.
A 3d printable clam for casting keys. I made it for mainly dimple keys as those are the most common keys where I live.
Watch Deviant Ollam explain key casting here: https://www.youtube.com/watch?v=ZXPsAa8Owco
The holder is only to keep the clam in the correct orientation when molding. It will not hold the pieces together firmly enough.
Print Settings
Printer Brand:
CEL
Printer:
Robox
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Filament: CEL PETG/ABS/HIPS Netural
Notes:
I would not use anything flexible or with low melting point.
Category: Parts