GeeeTech A30M/A30T Extruders Lowering System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
System to lower the Extruders on the GeeeTech A30M/A30T to the same level as the hotend
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 148
- Wydruki
- 3
- Wyświetlenia
- 902
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
After having a bunch of problems tunning the stringing problems on my GeeeTech A30T, I found out that seems to be a common problem with the printer in question. After seeing a bunch of solutions relying on lowering the extruders from the top gantry to the same level as the hotend I decided to try it out for myself, and ended up creating this full 3D printed solution for my GeeeTech A30T, which ended up actually working and solving my stringing problems.
Since I decided to go for a full 3D printed solution I ended up using one the Aluminum Extrusion by Rudy J, to which I did a little remix to include a 5mm thick base on both tops of the aluminum profile in order to prevent the use of any raft while printing them.
The complete printable system uses the following items:
- 1x - Left Holder
- 1x - Right Holder
- 2x - Central Holder
- 3x - 2020 Aluminium Extrusion with 113.3mm
In case you go for the use of an actual 2020 Aluminium Extrusion profile piece instead of the 3D printed ones, you will need a 340mm long piece, and the Central Holders are no longer necessary. Still, in case you use a smaller length for the aluminum profile I suggest either using the Central Holders or another option is the Connector for 2020 aluminum extrusion by Luka Sudar in order to keep everything connected without problems.
Extra Info:
Modeling software - Autodesk Inventor 2021
Slicing Software - Prusa Slicer v2.4.2
Printer - GeeeTech A30T
Fillament - GeeeTech PLA White