Spot Welder Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick and Dirty Remix done with Tinkercad.com (https://www.tinkercad.com/things/2u0aUiAwST9) Therefore fits are not…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Quick and Dirty Remix done with Tinkercad.com
(https://www.tinkercad.com/things/2u0aUiAwST9)
Therefore fits are not optimal... But I was able to grind the housing without any problems.
I used a reset switch from an old PC as a switch.
The piece of fiber optic cable happened to be lying around with me - but you can simply drill a small hole in the cover if you don't have a fiber optic cable at hand.
Good luck and have fun building your own!
Print Settings
Printer:
Alunar M506
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.3
Infill:
25%
Filament:
Alunar PLA
blue
Category: Electronics