Anycubic Photon Mono 4k Handle with Screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of SnopSnapi's excellent handle design with two M3 screw holes to attach it more securely.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 171
- Wydruki
- 3
- Wyświetlenia
- 748
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Thanks to @SnopSnapi for the excellent model and sharing the CAD. I was able to import and quickly add some countersunk holes for M3 fasteners to hold the lid more securely.
I attached with M3x10 SHCS and M3 Locknuts on the inside of the lid/cover for the printer.
I suggest applying a piece of painter's tape in the center of your lid and then measure and mark the location of the handle and the drill hole locations. I used a drill bit designed for acrylic and it had no problem with the lid and drilled a nice clean hole. I also suggest slightly over-sizing the drill bit from M3 to give yourself a little wiggle room.
I printed this in Sparta3D ABS+ in Elegant Teal and it came out great and works well.