1 / 2
Nodemcu and Relay Housing for Garage Door Opener
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small housing to contain a cheap NodeMcu copy and a single relay.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A small housing to contain a cheap NodeMcu copy and a single relay. This is mounted in my garage to receive a signal for my OpenHAB installation to both control the door and report weather its open or closed.
This project was based on this:
https://www.hackster.io/kayakpete/esp8266-wifi-smart-garage-door-e08013
The lid is held on by a single screw in the center and lips in the lid hold the boards in place once closed.
Update: 4/30/18 - Revised lid so that it can be removed while wires are still connected.