1 / 2
Axiom Ultra Spark Bicycle Taillight Button Cover — zdjęcie 1
1 / 2

Axiom Ultra Spark Bicycle Taillight Button Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,34 € – 0,42 € netto (bez VAT)

Dla pliku: Bike_light_protector-V3_0.2mm_PLA_MINI_30m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,38 € netto (środek widełek).

Masa podana przez autora
2 g
Czas druku podany przez autora
30,6 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Cover to prevent the light from turning on when it's bouncing around in my pocket or bag.

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
138
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I have a bicycle taillight with a very sensitive power button that makes it really easy to accidentally turn on.  It can happen when it's just sitting in my coat pocket.  By the time I realize it's on, half the battery is gone.  So I designed this simple cover to make it less likely for the power button to be bumped. There's no good way to mechanically lock the cover to the light, so it's just stays on with friction, which works pretty well.

This is designed for an Axiom Ultra Spark taillight (‎40-1466-NON-NON).

Tagi