Minimalist car mount for Spigen Tough Armor case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a minimal phone mount. I included the step file for the piece that goes onto your phone so you can modify it…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 544
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
This is a minimal phone mount. I included the step file for the piece that goes onto your phone so you can modify it to fit your phone. In Cura, you may need to increase the size of all the piece to 1000%. I recommend sanding between the gaps in the reciever piece that connects with the piece that goes on your phone. To install the connector onto your phone, take your case off and insert the into the Apple logo hole in your case(THIS MAY NOT WORK WITH ALL CASES). Use a little bit of hot glue to hold it in place and prevent it from slipping. I also included a step file of just the reciever so you can make your own mounts.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
80
Filament: Inland PLA black
Notes:
Do whatever settings work best with your printer, however i reccommend 0.15 for the layer height for this to work the smoothest.
Category: Mobile Phone