Pez Inspired AAA Battery Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by the Pez candy dispenser, this model will dispense one battery from its storage at the flip of a lever.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 1237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Stores up to 4 AAA Batteries that can be individually dispensed by flipping the lever on the Pusher piece.
"Detailed" files have more of an eye-catching design, while “customizable” can be easily edited to enable you to make more personal versions.
Feel free to remix with your custom additions!
Parts
Printed
- Magazine
- Slide Cover
- Lifter
- Pusher
Non-Printed
- 2 Springs (about 40 mm in length and inner diameter of ~4.5mm)
- Glue (Recommended)
- AAA Batteries
Assembly
All parts except the Pusher can be printed with no supports. Ensure your material choice for the Slide Cover has good layer adhesion or print it on it's side, as it will have a lot of upward pressure on it.
- Glue Springs to Lifter
- Insert Lifter into Magazine
- Align Springs in Magazine, Glue in place
- Snap Pusher into Magazine
- Load AAA Batteries into Magazine
- Slide the Slide Cover on to the matching grooves
Steps can be seen in this video: