HTC Vive Controller Belt Clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips for attaching an HTC Vive wand to a belt, for use as a hip tracker.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 459
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution
Clips for attaching an HTC Vive wand to a belt, for use as a hip tracker.
Details
One clip slips around the neck of the wand, the other wraps around the end & pins snap into the holes. The extra length coming down off the clip is for extra stability against bouncing up and down.
Modeled for a belt approximately 30mm wide, and 5mm thick, but will probably work with a wide range of belt sizes.
Used Stein's fabulous model of the controller to get accurate contours - a perfect fit on the first try. It's so accurate, you should probably scale up by 1-2% to account for shrinkage.
Update 2020/09/21: Made the upper clip more secure by bringing it further up around the wand.
Category: Video Games