1 / 2
Armattan Chameleon Runcam Micro Swift 2.1mm Adapter — zdjęcie 1
1 / 2

Armattan Chameleon Runcam Micro Swift 2.1mm Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an adapter to hold a Runcam Micro Swift (tested with v2, 2.1mm) on an Armattan Chameleon. Print in solid tpu.…

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
235
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

This is an adapter to hold a Runcam Micro Swift (tested with v2, 2.1mm) on an Armattan Chameleon. Print in solid tpu.

Attach to Runcam on either side using the Runcam's included screw + washer and tighten good. Install in the Chameleon cage, and use the frame's sunknut + thumbscrews on the rear hole where they normally go. No screws needed in the middle hole.

Category: R/C Vehicles

Tagi