MakerGear M2 1.75mm Filament Drive Split Design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had an issue with the MakerGear M2 filament drive where it would sometimes jam in such a way as to "lock" the hotend…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I had an issue with the MakerGear M2 filament drive where it would sometimes jam in such a way as to "lock" the hotend into the groove mount, forcing me to practically break the filament drive to get it unjammed. I split the design into two, so that the groove mount for the hotend could be removed and jams cleared more easily.
Parts modified in Autodesk 123D Design (*.123dx file format)
Maintained at github.com/leandog/M2
See instructions tab for assembly.
Instructions
Attach two pieces together with M3x20 screws and nuts.
Category: 3D Printer Parts