Swiss Cheese Fridge Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D model of cheese wedge with holes for magnets in base
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 297
- Wydruki
- 4
- Wyświetlenia
- 888
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Novelty 3D fridge magnet designed by myself in Shapr3D. Can be printed on SLA or FDM 3D printers.
If printed at actual size then 6mm x 3mm neo magnets can be glued into the 3 recesses on the underside. These magnets are readily available and inexpensive to purchase.
Filament printing- can be printed flat on the base with or without supports, best with supports but they can be fiddly to remove.
Resin printing- best angled at 30 degrees before adding supports
Check out my YouTube Channel ( Jimson's Stuff) where I make all sorts of things and also review tech including 3D printers.
https://www.youtube.com/channel/UC6h82LH3PtdiSHaj_7f09Fg