Sharpie Keepers: Quick Printing and Multiple Sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick-printing sleeve with a ring that clips under a Sharpie cap, allowing attachment of a keyring or other retainer.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 488
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
Do your Sharpies grow legs and walk off? Do you find yourself ready to mark your work but with no marker in reach? Not anymore when you print one of these keepers!
Just pick out your size, print it out (15-20mins, tops!), slip it onto the cap under the clip, and attach it to your keyring, badge-pull, paracord, dog leash, quantum tangler, or whatever method you're using to keep things tied to yourself!
The “Ultrafine” fits Ultra-Fine-Point Sharpies and leaves just enough room to slip past the elevated text on the cap. The “Fine” fits the standard Fine-Point Sharpie with a little wiggle up top since they taper. The “Super” fits the jumbo-sized Super Sharpie, and has a little cutout so it can fit over the nub on the cap, and will also have a little wiggle up top. In all cases, the clip holds the Keeper in tightly so you don't have to worry about leaving it behind or a well-meaning co-worker “borrowing” it.
Printer Settings:
I printed mine in PLA at 0.28mm THICC since it doesn't need to be pretty, just pretty strong. I also used 4 perimeters and “Thin wall detection”, but you can likely achieve this with a 100% infill instead.
Coming Soon, pending time: A chiseled clip for the Milwaukee Inkzall.