1 / 7
Leave On Filament Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament clip that you can leave on the spool while printing
- Ocena
- 4,9 / 5
- Polubienia
- 26
- Pobrania
- 132
- Wydruki
- 12
- Wyświetlenia
- 633
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 12) (Komentarze: 13)Remiksy (1)Kolekcje (34)Powiązane
I didn't want to have take my filament clip on and off and potentially lose them so I made one that you can just leave on the filament during printing. The filament will slide through easily for printing but clamps down strong when in storage. There are two versions. One with a single pinching side and another that is reversible so it's easy to connect from either side. The double sided one also is also good to use if you need more space for handling the filament since it's second opening is spaced further.