Bed-attached Camera Mount for Prusa MINI
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I like the look of stationary time lapses of 3D prints. Easiest way to do that was to mount a camera to the bed so...
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 703
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is meant to attach to the printer with the stock, front left bed screw. There is a M3 nut in the camera mount point and I used a M3x50mm screw to connect it at the base for added support through the shaft. It's easy enough to make versions that don't require the long screw.
The camera mount is meant to be interchangeable meaning it will fit a variety of cameras. Just build a new mount piece.
Fusion file is a mess, but it is there if you want to modify it yourself.
"4K Camera Mount" for use with https://amzn.to/3Q7Fdbb
Arducam Mount for use with https://amzn.to/3Q5XWnB
(affiliate links)